|
Products
SW 630-ST
Automatic Slot Grinder
All control elements of the grinder are clear and easily
accessed. Its short set up times mean high productivity
and economical effectiveness.
Technical Data
| Working range |
Saw Blade Diameter
Tooth Pitch
Saw Blade Thickness
Rate of Grinding |
165 – 630 (650) mm
(optionally from Ø 140 mm)
3 – 50 mm, also variable tooth pitch!
6 mm
approx. 24 – 50 tooth/min. |
| Grinding Wheels |
CBN-grinding wheel
Bore size
Thickness
Grinding speed |
25 or 30 mm
8 mm
(0.2) / 0.3 / 0.4 / 0.5 mm
approx. 30000 U/min. |
| Electrical installation |
| Power input machine |
approx. 0.4 kW |
| Air requirements |
| |
Compressed air supply (buyer´s care) min. 6
bar (about 85 p.s.i.), 225 l/min. |
| Weight |
| |
approx. 180 kg |
| Dimensions (W x D x H) |
| |
900 x 1020 x 1450 mm |
Working method
A pre sharpened saw blade is clamped into the machine. The reciprocating mechanism for alternate
slot cutting and the depth of the chip breaker slots are set by the means of adjusting screws. The
values for alternate slot cutting can be checked by a dial gauge. The built in electronic teeth counter
stops the machine automatically after the number of preset teeth are completed. The machine is fitted
with an air operated high speed grinding spindle.
The standard grinder is for wet grinding. The machine is also suitable for sawblades with variable tooth pitch.
|
